The X-Files 1x10 !!LINK!!
HDTV Supply's WolfPack 1x10 HDMI Splitter Over CAT5 is a unique device that allows connecting any HDMI digital video source such as a DVD player, Camera, AppleTV, Satellite, Cable Box, PC, Xbox, PS43 and more with an HDMI output to up to 10 digital displays upwards of 300 feet away. The 1x10 HDMI distribution amplifier splits an HDMI signal into 10 mirrored (the same) outputs without signal loss upwards of 300 feet. It has Remote IR to control the source from 10-TVs, is upgradeable by buying more HDMI receivers and does not require software, buttons or set up
The X-Files 1x10
The 1x10 HDMI Splitter Over CAT5 also supports control of the source device (like a cable box) from the 10-far away TV locations via its built in IR control. Just point your source remote control at the supplied IR cable located at the TVs to operate the cable box. It uses CAT 5e/6 cables and a Gigabit Ethernet LAN switch with MJPEG techniques and an industry standard IP protocol to deliver 1080p video from sources that are 300 feet away from the Ethernet switch and another 300 feet away to the TVs. It also allows the system to grow in the field as its design allows you the flexibility of adding more displays to the system based upon the number of unused Ethernet ports available.
CAT5 Installation Tips (Don't Use Patch Panels) Why not buy this 1x10 HDMI Splitter Over CAT5 w/Remote IR today?This 1x10 HDMI Splitter Over CAT5 Works with: Any high definition Dish Network and DirecTV receiver with HDMI outputs
High definition TiVo's with HDMI outputs
Any high definition cable receiver with HDMI outputs
Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
Any "Over The Air" (OTA) high definition receiver with HDMI outputs
Sony PS4, HD DVD and Blu-ray DVD players
Any Xbox360 with HDMI outputs
Any upconverting DVD player with HDMI outputs
Any DVHS VCR with HDMI outputs
Any APPLE TV with HDMI outputs
A VuDu or Roku with HDMI outputs
Any PC video card with HDMI outputs
Any high definition camcorder with an optional type C to standard HDMI cable
Any HDCP compliant HDTV, monitor and projector. and other similar devices.
Why not buy this 1x10 HDMI Splitter Over CAT5 w/Remote IR today?Q: What are the IP addresses of the transmitter and receiver? A: Here are the IP addresses for the HDMI distribution set(s)... 192.168.168.55 - Transmitter 192.168.168.56 - Receiver Q: Are all ports capable of 1080p HDMI? A: Yes, even at 300 feet.
Q: Sometimes we see a message on the screen "Searching for TX", what is that? A: That usually happens when the source is turned off or in a standby mode with the HDMI connector not outputting any signal. The (TX) transmitter is looking for a hot HDMI signal on its input. Why not buy this 1x10 HDMI Splitter Over CAT5 w/Remote IR today? Related Products
Customers Also Viewed Quick view Add to Cart
Preparation Information:Our Kiln Dried 1x10 White Pine Shiplap Siding is ready for installation once received on your jobsite. However, wood will shrink and swell with any changes in moisture content and weather. According to NeLMA, to minimize dimensional change after installation, install shiplap siding at a moisture content that matches with local climate as closely as possible. If climate in a particular region causes wood to maintain 8% to 13% moisture content annually, then the most ideal shiplap siding would be installed at a moisture content within that range, and the material would be stored, stickered and protected for a week to ten days prior to application.
This groupset includes 4 pieces, and is a great if you are looking to upgrade to a 1x10 system. 10 speed chain is included. A narrow wide chainring is required 30-32 tooth works best. We have multiple to choose from in our store.
The ADVENT X is an Enduro-ready 1x10-speed group, which can boast not only a larger gear ratio range, but also a much lower weight than the ADVENT series. The group is suitable both for beginners who want a high-end experience and for experienced riders who are looking for the best possible value for money.
Crankset/ GearingThe 1x10 drivetrain uses a crankset with 32t chainring, combined with a wide range 11-42t 10spd cassette. That combination allows you to hammer up or down hills and flats, with a bailout to get up near-vertical walls, while ripping descents. The outboard bottom bracket bearings further provide increased stiffness and durability, helping deliver all your power to the pedals. 041b061a72